surface film

英 [ˈsɜːfɪs fɪlm] 美 [ˈsɜːrfɪs fɪlm]

网络  表面膜; 表膜; 薄面; 表面薄膜

化学



双语例句

  1. During electrical sliding wearing, the surface film can reduce the friction coefficient and be beneficial to the frictional performance of the material.
    结果表明,电磨损时,在电刷和换向器间形成一层润滑膜,可降低粘着磨损。
  2. The Effect of Internal Cooling Channel on the Heat Transfer of Outer Surface Film Cooling
    内冷通道特性对外表面气膜冷却换热影响研究
  3. The smooth surface film must be very thin, then, the social system quite unstable and unhealthy.
    由此看来,这层平稳有序的表皮一定很薄,社会体系实际上相当不稳定、不健康。
  4. Based on the principles of formation of surface film, the discriminative equation of forming multi-layer ILM were derived and verified by experiments.
    经过对多层界面液膜的实验探索,获得了四相物系双层界面液膜和五相物系三层界面液膜等一系列多层界面液膜。
  5. Lock the carriages on with this hook. It also hangs suspended from the underside of the surface film by its tail, which acts as a breathing tube.
    用这个挂钩把客车车厢挂上(机车)。它也能用尾巴倒挂在水面薄膜下面,尾巴就是它的呼吸道。
  6. The indentations in the surface film are getting deeper& but things are about to change anyway, because it's starting to rain.
    水面薄膜的纹路更深了&但形式大概要变了,天开始下雨了。
  7. The theoretic mechanism on heavy metal ions partitioning problem, such as: Two Step Model, Multiple Surface Sites Model, Surface Film Model and Chemisorption Model etc.
    讨论了两阶段理论模型,多重表面座模型,表面薄膜模型和化学吸附层模型的应用;
  8. The corrosion resistance behavior of the surface film of the copper alloy with three iron series elements of nickel, iron, or cobalt in different media is presented.
    介绍了含镍、铁、钴这三个铁系元素的铜基合金表面膜在不同介质中的耐腐蚀行为。
  9. Efficiency enhanced by lateral liquid spreading and surface film renewal.
    由于横向液体扩散和不断地更新液膜,使效率大大提高。
  10. When the transfer cold, peel off the surface film.
    待产品冷却后,将表面胶片撕离即可。
  11. We designed cavity surface film of high damage threshold.
    并从理论上设计出了高损伤阈值腔面膜。
  12. The thermal insulation property of a light solid extinguishant produced by the authors was tested, and the influence of the surface film to the thermal insulation property was studied in this paper.
    通过对自行研制的轻质固体灭火剂隔热性能的测试,研究了表面隔油膜对隔热性能的影响。
  13. Increasing the consistency of surface film is the basic measure of decreasing oxidation reaction.
    提高表面膜的致密度,是降低氧化反应的根本措施。
  14. A model on surface film of copper with chloride and benzotriazole has been suggested.
    文中还提出了苯并三氮唑和氯离子参与形成铜表面保护膜层的模型,并结合该模型对铜腐蚀性能和缓蚀机制进行了解释。
  15. At the same time, the effect of RE and Ca on the self-repairing ability of the surface film of Mg-Al alloy was examined by means of pulsed polarization.
    并通过脉冲极化研究了在Mg-9Al合金中加入RE、Ca对合金表面膜的自修复能力的影响。
  16. Surface film study of glow ion nitrided titanium
    金属钛辉光离子氮化制备氮化钛膜层的研究
  17. Pans and field experiments were conducted to investigate the effect of surface film on ammonia volatilization from water.
    通过盆钵和田间试验,研究了表面分子膜对水体氨挥发的影响。
  18. Research and Application on Additive of Surface Film Under a Dry Friction
    干摩擦条件下表面成膜添加剂的应用研究
  19. The surface film of Al alloy anode formed in the air, is mainly composed of aluminum and zinc oxide.
    铝合金阳极在空气中氧化形成的表面膜,由铝和锌的氧化物组成。
  20. Corrosion inhibition performance of surface film formed on carbon steel induced by imidazoline inhibition MCI was studied by potentiodynamic polarization technique.
    利用动电位扫描法研究了咪唑啉缓蚀剂MCI在碳钢表面成膜的耐蚀性能;通过电化学交流阻抗技术。
  21. With the modified model and the optimized k f value, the effects of the surface film in reducing ammonia volatilization under different environmental conditions were simulated and analyzed.
    在该模型中,用选定的kf值对表面分子膜抑制氨挥发的效果与pH、风速、水深和温度等的关系作了进一步模拟分析。
  22. A experimental study on forming speed of the surface film on liquid aluminum
    液态铝合金表面氧化膜形成速度的实验研究
  23. The effects of temperature on decay process of foam and surfactant solution were discussed. The effects of temperature on such properties of foam surface film as adsorption, Marangoni effect and surface elasticity and viscosity were also stated.
    论述了温度对泡沫衰变过程,对泡沫表面膜性质(包括表面吸附、Marangoni效应、表面弹性和表面粘度)和对表面活性剂溶液的影响。
  24. In addition, the effects of potential and post-treatment on the composition of surface film were investigated by means of AES and XPS analysis, and the relationship between the composition and stability of film was discussed too.
    运用AES和XPS表面分析手段研究了304不锈钢表面膜的组成结构与外加极化电位,膜稳定性的关系。
  25. The corrosion rate, dezincification coefficient and polarization curves of boron modified HA177-2 brass with and without surface film were measured;
    测定了成膜前后加硼HA177-2铝黄铜的静态腐蚀速率、脱锌系数和电化学行为。
  26. The formation of the surface film can improve the wear resistance of ferrous sintered cam materials.
    该表面膜的存在可进一步改善铁基烧结凸轮材料的耐磨性。
  27. The measurement of thickness of surface film layer is quite important for fine processing techniques developed rapidly in recent years.
    在近年来迅速发展的微细加工技术中,表面膜层厚度的测量是十分重要的问题。
  28. Presents the basic structure and composition of passivated film and surface film of urea stripper, analyzes the corrosion of each part of urea stripper and various factors accelerating the corrosion of Ti material stripper, and proposes relevant preventive measures.
    介绍氨汽提尿素汽提塔钝化膜和表面膜的基本结构和组成;分析汽提塔各部位的腐蚀情况及影响钛材汽提塔加速腐蚀的各种因素,提出相应的预防和防护措施。
  29. A review is presented on the methods of preparation of single chain particles, including atomizer spraying, surface film spreading, freeze drying of very dilute solutions and microemulsion polymerization.
    本文综述了高分子单链颗粒的制备方法,包括极稀溶液喷雾法、表面扩张膜法、冷冻干燥法、微乳液聚合法等。
  30. Corrosion resistance and surface film on brass condenser tube containing boron
    含硼黄铜冷凝管使用前后表面膜及耐蚀性的研究